11 Steps to Enhance Safety of Bulk Carrier Ship Safety

Since the inception of merchant ships, bulk carriers have been used extensively for transporting cargo across oceans.

A wide range of commodities is carried in bulk that includes coal, grain, ore, cement, sulphur, bauxite, aluminium, steel coils, rice, sugar etc.

Prior to the Second World War, most of these commodities were carried by general cargo ships, but as time progressed, bulk carriers came into being.

The common bulk carrier consists of a double bottom, hopper sides and deck wing tanks used to carry ballast or cargo.

Loading arrangements in bulk carriers cause high shear forces at the end of the holds and that requires additional strengthening of the side shell in way of the bulkheads.

Hatches with large capacities are provided to facilitate rapid loading and unloading of bulk cargo; this is in place owing to the many voyages undertaken by a bulk carrier.

With the passage of time, bulk carriers have been improvised to enhance both the cargo carrying capacity and safety of the cargo and crew.

Related Reading:

9 Common Hazards Of Dry Bulk Cargo

However, several maritime accidents in the past have involved bulk carrier ships mainly because of the failure of ship’s structure, which resulted from deterioration of the ship’s hull, corrosion, fatigue, effects of cargo, water ingress etc.

Throughout the late 1990s, the issue of the safety of bulk carriers received consideration from IMO and other regulatory bodies.

The up-gradation of the integrity of bulk carriers had more focus put on the structural hull details, stress experienced due to cargo operations, structural and protective coatings, cargoes, maintenance and inspection of the ship structure.

Bulk Carrier Sizes

Capesize: These are ships too large to transit the Panama Canal. The deadweight (DWT) ranges between 80000-170000 tonnes
Panamax: Typically between 550000-70000 tonnes
Handysize/Handymax: This contributes to the majority of the bulk carrier fleet and ships in this category range between 10000 to 40000 tonnes DWT

In order to safeguard from these factors, bulk carrier ships are now added to the enhanced survey program (ESP) along with oil tanker ships.

In this article, we mention some important points that help in improving the overall safety of the ship.

Reinforcing the corrugated transverse bulkhead

Corrugated bulkheads can be seen as a transverse arrangement on the inside of the cargo holds. The concave shape is achieved by the use of plate rolls or heat line bending.

The corrugated has a higher strength than a flat plate when subjected to bending moments during cargo operations or even at sea.

The corrugations are present to negate the need for vertical stiffeners as with other structures; removal of these stiffeners also reduce costs as well as the overall weight.

Reinforcing the corrugated transverse bulkhead installed between No.1 and No.2 cargo holds and the double bottom of No. 1 hold.

This ensures watertight integrity to be maintained at all times even when the side hold or bottom is damaged.

Water Ingress Alarm

The water ingress alarm is in place seeing as the ingress of water may taint or corrupt the cargo/commodity being carried on a bulk carrier.

For example, rice or sugar when in contact with water causes tainting of the cargo rendering it unusable and therefore liable for rejection.

Checking and maintaining an active water ingress alarm in the cargo hold as per SOLAS requirement at all times.

For example, SOLAS states that “In each cargo hold, giving audible and visual alarms, one when the water level above the inner bottom in any hold reaches a height of 0.5m and another at a height not less than 15% of the depth of the cargo hold but not more than 2.0 m”.

Also, check and maintain the water ingress alarm in the area located at the forward of the cargo area.

It is advisable for the reader to go through the SOLAS Chapter XII Regulation 12 for a better understanding of this alarm system.

Hull Survey

A complete hull survey of bulk carriers as per IACS condition to maintain the strength of the ship’s hull. This is done as per the ESP and ensures that the IACS standards are complied with.

Avoiding Deck Wetness

Being exposed to the sea at all times, it is impossible to have a dry deck at any given second! However, what can be done is that the deck can be kept dry to an extent that is practically possible.

Protection from the weather in general and the spray is essential to the carriage of cargo on a bulk carrier. Increasing the Integrity of fore-deck fittings on bulk carriers to avoid the problem of deck wetness i.e. flowing water on ship’s deck due to rough weather, also known as green water loading.

Fitting Bulwark

A bulwark is the extension of a ship’s sides above the level of the deck. Not only does it fulfil the purpose of strengthening but it also prevents the outflow of water or, God forbid, oil!

The planking along the sides of a ship, above the upper deck and below the gunwale, also protect the crew from falling overboard.

Fitting of suitable bulwark in the forepart of the ship as per the requirement to avoid green water condition

Reinforcing Hatch Cover

Hatch covers are the primary arrangement for protecting the cargo being carried on board; also, to maintain the watertight integrity as well as to protect the cargo from the sea, sun and the weather in general.

During cargo operations in port (or at anchor), hatch covers are opened and closed often which means that they should be in optimum working condition.

The most common type of hatch cover is the McGregor hatch. Reinforce the hatch cover which is located at the forward of the ship within 0.25L, where L is the length of the ship.

Maintain Water Tightness

Maintaining water tightness of all the hatch covers to avoid water ingress. This can be done by the use of Ramneck hatch cover tapes that are additionally increased in the adhesive property by the use of a butane torch.

A fire hose may be used at high pressure to subject the hinges to a water jet at full force that can be used to determine the watertight integrity of the hatch.

Double Skin Side Shell Frame

Side shell frame to be double skin ensuring extra safety in case of structural damage. In layman terms, if one layer is compromised or breached, there is another layer to ensure that the hull is not entirely breached which might result in a lot of damage to the ship and its contents

Cargo Hatch Cover Alarm

Installation of an alarm system for opening and closing of a hatch cover for additional safety. When there is sudden downpour in port it is essential to close the hatch swiftly to ensure that the cargo does not get tainted due to the water. The presence of an alarm system is essential for the safety of crew as well as the cargo

Anti Corrosion Paint

A good anti-corrosive coating on the ship’s structure to avoid damage due to corrosion. The ship is subjected to great stresses from the sea which might result in causing the structure to reduce in strength.

Not just the hull, but the entire vessel is vulnerable to constant forces of nature (as well as internal stresses due to the cargo) which renders the anti-corrosive paint essential to the structural integrity of the vessel.

It is important to remember that whichever part is being painted must be de-rusted and cleaned prior to such application. Painting on top of rust is only going to add to the misery later on!

Free Fall Lifeboat

A free-fall lifeboat is now a requirement in all bulk carrier ships. All crew must know the emergency evacuation procedure from free-fall lifeboat.

Aside from the launching and evacuation procedure, the system holding the lifeboat in places such as the davit, gripes and other such moving parts must be maintained regularly so that they do not get jammed when they need in case of an emergency.

There is ample work on the ship on any given day and it is not possible to adhere to everything all the time.

However, a planned schedule for the upkeep of all the above-mentioned aspects can ensure that bulk carriers operate smoothly and economically, reducing any chance of damage to the safety of the ship or life at sea.

You might also like to read:

Disclaimer: The authors’ views expressed in this article do not necessarily reflect the views of Marine Insight. Data and charts, if used, in the article have been sourced from available information and have not been authenticated by any statutory authority. The author and Marine Insight do not claim it to be accurate nor accept any responsibility for the same. The views constitute only the opinions and do not constitute any guidelines or recommendation on any course of action to be followed by the reader.

The article or images cannot be reproduced, copied, shared or used in any form without the permission of the author and Marine Insight.

Latest Ship Safety Articles You Would Like:

What are Fast Rescue Boats?

The Complete Guide To Liferafts on Ships

Emergency Response Drills On Passenger Ships Explained

How Ships Fight Corrosion at Sea?

Do you have info to share with us ? Suggest a correction

About Author

Shilavadra Bhattacharjee is a shipbroker with a background in commercial operations after having sailed onboard as a Third Officer. His interests primarily lie in the energy sector, books and travelling.